The page cannot be displayed BRockpoling.com is down BD 01/21/2005 03:00:04 PM

Finishing Doug Ubele 01/18/2005 01:46:57 PM

Doug, We've all abandoned this ship......(m) John How 01/19/2005 02:35:08 PM

So Long OLF-1 ....It was nice to know ya!(e) Dave B - SKG 01/16/2005 06:30:03 PM

Yeah, Adios Old OLF ! Don W 01/16/2005 10:22:03 PM

I am here by not paying attention to this forum and will be on the new only. Matt Gage 01/16/2005 08:22:52 AM

Matt, everything is happening at the new forum.. Lance 01/16/2005 02:37:16 PM

I came by mistake too, I'm going to delete this link... see ya. Bruce Dickey, moved to the new OLF forum. NEWOLF, not OLDOLF. 01/16/2005 06:11:28 PM

We're all over at the new forum, you might as well come too. BRuce D. 01/14/2005 01:07:46 PM

Looks like even the newbies are finding the new forum, welcome Skip Beach and Woody Walker Bruce Dickey 01/12/2005 09:43:05 PM

Congratulations Stan Thomison!!!!!!!! Luthier of the Week ! Don W 01/12/2005 02:35:01 PM

That beauty of a guitar in the OLF banner is a Kett (m) Lance K 01/12/2005 02:18:57 PM

Re: That beauty of a guitar in the OLF banner is a Kett (m) stan 01/12/2005 02:38:21 PM

MAJOR ANNOUNCEMENT Lance K 01/12/2005 09:53:48 AM

Re: MAJOR ANNOUNCEMENT Hank Mauel 01/12/2005 01:22:10 PM

Put in OLD Guitar Makers Terms (m) Lance K 01/12/2005 02:37:06 PM

Re: Put in OLD Guitar Makers Terms (m) Hank Mauel 01/12/2005 04:22:35 PM

Good one... ! [e] Don W 01/12/2005 02:33:41 PM

Re: MAJOR ANNOUNCEMENT Mario 01/12/2005 12:35:09 PM

Re: MAJOR ANNOUNCEMENT - WOW THAT's GREAT!!! THANKS LANCE!(e) Dave B - SKG 01/12/2005 10:10:28 AM

1959 Sitka for violin & mando tops Tim McKnight 01/10/2005 09:35:19 PM

Lance Feedback problems with new site John Metenkovic 01/10/2005 05:43:34 PM

When I load the new site here were I work I get the whole thing iin less than 15 seconds. John How 01/11/2005 10:37:12 AM

Works fine for me PaulB 01/10/2005 09:22:56 PM

See if it is better now Brock Poling 01/10/2005 07:58:34 PM

Re: See if it is better now John Metenkovic 01/10/2005 09:03:57 PM

its shouldn't work that way (m) Lance 01/11/2005 01:40:20 PM

Lance, Brock and all the crew...... John How 01/11/2005 01:50:56 PM

Thanks John.... LanceK 01/11/2005 02:45:37 PM

Not at all... (m) Brock Poling 01/11/2005 02:39:42 PM

Re: Not at all... (m) Mario 01/11/2005 04:35:35 PM

Re: See if it is better now Mario 01/10/2005 08:35:32 PM

I am pretty sure... Brock Poling 01/11/2005 08:44:45 AM

Re: I am pretty sure... Mario 01/11/2005 11:38:00 AM

Ok... question Brock Poling 01/11/2005 02:37:49 PM

Re: Ok... question Mario 01/11/2005 04:32:09 PM

I knew it... Brock Poling 01/11/2005 07:11:02 PM

Re: I knew it... Mario 01/12/2005 12:52:55 AM

Maybe so.... but.... Brock Poling 01/12/2005 01:03:56 AM

Re: Maybe so.... but.... Mario 01/12/2005 01:28:42 AM

Actually.... PaulB 01/11/2005 07:20:33 PM

It's fast when you consider that..... John How 01/11/2005 01:42:05 PM

Re: It's fast when you consider that..... Mario 01/11/2005 04:31:31 PM

But from my point of view it doesn't seem any slower than the old forum. (m) John How 01/11/2005 11:39:32 PM

Lance it's a Lefty..... BD 01/10/2005 11:41:21 AM

more than being a lefty, its smaller! Now guess whos? LanceK 01/10/2005 12:08:50 PM

Hank Mauel? [e] Don W 01/12/2005 01:22:46 PM

It's strange... John Mayes 01/11/2005 01:03:51 PM

Is it mine? (e) John How 01/10/2005 12:22:44 PM

ENTER THROUGH THE MAIN URL. YOU GET TO CHOOSE. Lance 01/10/2005 10:09:13 AM

Hand Plane Doug Ubele 01/10/2005 09:37:53 AM

Re: Hand Plane Alan Carruth 01/10/2005 04:49:46 PM

Re: Hand Plane This is embarassing.. 01/12/2005 04:42:24 PM

Re: Hand Plane Who are U? 01/12/2005 09:50:37 PM

Re: Hand Plane- WHICH L-N do you recommend? Dave B - SKG 01/11/2005 09:45:50 AM

Re: Block Plane Don W 01/10/2005 11:55:07 AM

I've only bought one new plane in my life and it was junk.... Bruce Dickey 01/10/2005 11:38:07 AM

Yeah, I need to do that. Brock Poling 01/10/2005 11:42:52 AM

Re: Yeah, I need to do that. Bruce Dickey 01/10/2005 11:55:11 AM

Lance the brockpoling.com address got rid of the double header problem BD 01/10/2005 09:35:37 AM

My Bad! I forgot to update the testpage1 after we added the sponsers to the new forum..enjoy Lance 01/10/2005 10:07:07 AM

All Right, now I'm in Hog Heaven, Arkansas Bruce Dickey 01/10/2005 11:39:48 AM

Where is the new page? is this the old page? Craig L 01/10/2005 06:56:25 AM

Ok... will do, I will send it to you tonight Brock Poling 01/10/2005 09:08:23 AM

Which is it? Mario 01/09/2005 01:45:25 PM

Re: Which is it? LanceK 01/09/2005 04:18:09 PM

Re: Which is it? Mario 01/09/2005 05:56:45 PM

Re: Which is it? LanceK 01/09/2005 06:22:03 PM

Re: Which is it? Mario 01/09/2005 07:14:02 PM

Re: Which is it? LanceK 01/09/2005 08:19:35 PM

Re: Which is it? Mario 01/09/2005 08:23:08 PM

Ok... here's the deal. Brock Poling 01/10/2005 12:45:02 AM

Re: Ok... here's the deal. Mario 01/10/2005 12:41:03 PM

Re: Ok... here's the deal. Mario 01/10/2005 01:04:29 PM

I understand (lm) Brock Poling 01/10/2005 02:52:26 PM

Re: I understand (lm) Mario 01/10/2005 06:44:35 PM

Same thing I was experiencing until they told me where I could go..... BD 01/10/2005 01:44:42 PM

Re: Which is it? LanceK 01/09/2005 08:29:17 PM

Re: Which is it? Tim M 01/09/2005 08:50:25 PM

Re: Which is it? The new one is a site within a site, so it's double loading all the pics of sellers, forum, etc. Bruce Dickey 01/09/2005 09:24:17 PM

What do you mean? Brock Poling 01/10/2005 12:48:57 AM

I think what he means Lance 01/10/2005 08:31:08 AM

No, I wasn't going to say how bad slow the new page is because I figured you guys knew it already. Bruce D. 01/10/2005 08:41:35 AM

Can you make me a screen shot of what you are seeing, I am not getting that Brock Poling 01/10/2005 08:49:08 AM

Nevermind.... Brock Poling 01/10/2005 09:07:32 AM

Bruce, follow this link LanceK 01/10/2005 08:44:00 AM

Re: What do you mean? Don W 01/10/2005 07:15:23 AM

Test Run--pix included (hopefully) Steve Kinnaird 01/08/2005 02:28:52 PM

Re: Test Run--pix included (hopefully) stan 01/08/2005 03:05:35 PM

Ok, that was too small. Let's try this one.... Steve Kinnaird 01/08/2005 02:45:21 PM

Thanks guys! Now, details.... Steve Kinnaird 01/08/2005 11:30:20 PM

Wow very nice guitar Steve [e] Matt G 01/09/2005 12:56:14 PM

I think that is a beautiful guitar! John Kinnaird 01/08/2005 10:07:54 PM

I still think the Kinnaird brothers are trying.......... Don Atwood 01/08/2005 08:34:11 PM

Outstanding Steve..WOW!!!!!! WalterK 01/08/2005 04:20:31 PM

OUTSTANDING! LanceK 01/08/2005 03:02:21 PM

Last Luthier Lunch BD 01/08/2005 02:22:07 PM

Forwarded to my wife. I'll let you know how it turns out :-) Don Atwood 01/08/2005 08:36:34 PM

Re: Forwarded to my wife. I'll let you know how it turns out :-) BD 01/08/2005 11:07:22 PM

Last Luthier Lunch BD 01/08/2005 02:20:18 PM

Salvage the disaster Ed Barajas 01/08/2005 12:43:39 AM

If The ZootMan shows up in your front yard... JJ 01/09/2005 06:52:31 PM

Ed, definitely worth a try <m> Don Atwood 01/08/2005 08:38:23 PM

With any wood....[m] Don W 01/08/2005 09:43:06 AM

Eucalyptus! are you kidding! HECK YES! (m) LanceK 01/08/2005 06:42:21 AM

Re: Salvage the disaster Ed Barajas 01/08/2005 01:17:21 AM

Re: Salvage the disaster Snick Hlasnick 01/08/2005 10:06:57 PM

Re: Salvage the disaster blues creek guitars 01/09/2005 09:49:18 AM

Re: Salvage the disaster Ed 01/09/2005 04:37:02 PM

I guess it's un-officially Official, come try out the new forum software... Bruce Dickey, click here, sign up, see you there 01/07/2005 10:25:11 PM

How did you get your own pictures in the avatar window? 01/08/2005 08:44:30 AM

that was me..... darn enter button Matt Gage 01/08/2005 08:45:45 AM

Matt, the new forum software allows full use of HTML and addresses from other sites. Bruce Dickey 01/08/2005 10:42:53 AM

hmmmm, I tried that....did`nt work for some reason [e] Matt G 01/08/2005 03:04:57 PM

Question for all you "plan" makers... John Elshaw 01/07/2005 09:35:08 PM

Re: Question for all you "plan" makers... Mario 01/09/2005 01:42:51 PM

Great ideas... John Elshaw 01/08/2005 08:08:23 AM

Frank Ford used to photograph inside guitars with... Bruce Dickey 01/07/2005 10:05:39 PM

Frank Ford also made this comment: Bruce Dickey 01/07/2005 11:40:45 PM

URL for the test-forum? Mattia Valente 01/07/2005 05:29:06 PM

right here LanceK 01/07/2005 07:05:57 PM

Auction redwood top arrived, with another one stan 01/07/2005 03:45:09 PM

Auction redwood top arrived, with another one Bruce Dickey 01/07/2005 05:56:52 PM

Don't know which Don called me but No E-Mail arrived BobC 01/07/2005 02:24:00 PM

Re: Don't know which Don called me but No E-Mail arrived Don W 01/07/2005 02:35:40 PM

Back in business(m) BobC 01/07/2005 08:47:59 AM

Re: Back in business(m) John Mayes 01/07/2005 12:06:54 PM

John, how close to Tulsa are you? Bruce Dickey 01/07/2005 06:07:26 PM

Re: John, how close to Tulsa are you? John Mayes 01/07/2005 07:57:36 PM

Re: John, how close to Tulsa are you? stan 01/07/2005 07:16:31 PM

At Tulsa, I visited Paxtons, years ago with a friend... Bruce Dickey 01/07/2005 09:46:01 PM

Re: Back in business(m) BobC 01/07/2005 03:21:52 PM

Re: Back in business(m) stan 01/07/2005 11:58:16 AM

Re: Back in business(m), all right, Zoot Us. BD 01/07/2005 08:54:44 AM

General International Contact Info? Paul Woolson 01/07/2005 08:31:15 AM

Thanks Bruce Info inclosed Paul Woolson 01/07/2005 10:46:11 AM

First contact your dealer, he'll have contact info for the Rep... Bruce Dickey 01/07/2005 09:00:29 AM

Re: First contact your dealer, he'll have contact info for the Re... BD 01/07/2005 09:05:48 AM

The machine BD 01/07/2005 09:16:33 AM

Assistance Button gives this info.... Paul sounds like you already tried this... Bruce Dickey 01/07/2005 09:19:37 AM

nancy.proulx@general.ca BD 01/07/2005 09:22:13 AM

Cajun Dish as promised, Red Beans and Rice Bruce Dickey 01/07/2005 01:30:24 AM

I had that stuff at least once a week growing up John Kinnaird 01/07/2005 07:24:45 AM

Re: Cajun Dish as promised, Red Beans and Rice BD 01/07/2005 02:00:54 AM

Inlay tool special blues creek guitars 01/07/2005 12:02:06 AM

rosette ab or pearl pieces stan 01/06/2005 06:17:38 PM

Re: rosette ab or pearl pieces blues creek guitars 01/07/2005 09:03:05 AM

I've sort of gravitated back to solid curved pieces John Kinnaird 01/06/2005 09:29:34 PM

Me too. Steve Kinnaird 01/06/2005 10:48:46 PM

Not ablam? Brock Poling 01/06/2005 06:57:55 PM

Re: Not ablam? stan 01/06/2005 07:48:31 PM

first pay commission well sort of anyway stan 01/06/2005 03:16:35 PM

Awesome ! [e] Don W 01/07/2005 07:05:37 AM

Re: first pay commission well sort of anyway BobC 01/06/2005 06:57:01 PM

I hope it works out for you Stan!!!!! WalterK 01/06/2005 04:46:07 PM

commission , Stan the Man.... Bruce Dickey 01/06/2005 04:16:20 PM

Cool.. Good for you Brock Poling 01/06/2005 03:22:57 PM

Asian Relief guitar raffle.... Dave Wendler 01/06/2005 12:30:24 PM

Excellent! and the OLF fund drive is over 200.00 with 3 weeks to go! Comon folks LETS MAKE A DIFFERENCE! LanceK 01/06/2005 12:32:21 PM

ASIAN TSUNAMI Relief -----Just a reminder-- link above, thanks to all who have given, LanceK 01/06/2005 12:14:06 PM

HEY BD CONGRATS, NICE WEB SITE!! Brian H (bkhawk27) 01/05/2005 10:22:25 PM

Re: HEY BD CONGRATS, NICE WEB SITE!! Bruce Dickey 01/06/2005 12:13:45 AM

Walter I answered your post from yesterday see your original thread..(e) Mp 01/05/2005 04:34:53 PM

For those of you that would like to tell me what to do....(m) Mp 01/05/2005 04:24:59 PM

The Ol' Blunderbuss Attempt Steve Kinnaird 01/05/2005 02:20:33 PM

Re: I too have been a bit remiss BobC 01/06/2005 01:27:58 AM

And did you notice.... Steve Kinnaird 01/06/2005 02:19:03 PM

Re: And did you notice.... You may be right, Steve. Hmmm, I didn't realize what I was getting myself into... this might be tougher than routing good binding ledges. Thanks again for the welcome! - Viv 01/06/2005 03:41:29 PM

Thanks, Steve! And howdy right back! (e) Vivian Ecker 01/05/2005 03:22:26 PM

Aloha, from Arkansas.... Bruce Dickey 01/05/2005 11:12:37 PM

New Addition to the Luthiers Bio section Pg2 Please welcome Vivian Ecker! LanceK 01/05/2005 12:23:40 PM

Now you've done it ... Pete Licis 01/06/2005 01:37:09 PM

Re: Now you've done it ... Vivian Ecker 01/06/2005 03:53:51 PM

Re: New Addition to the Luthiers Bio section Pg2 Please welcome V... Mike Mahar 01/06/2005 12:18:58 PM

Re: New Addition to the Luthiers Bio section Pg2 Please welco... Vivian Ecker 01/06/2005 03:52:17 PM

Re: New Addition to the Luthiers Bio section Pg2 Please welcome V... Alan Carruth 01/05/2005 06:14:27 PM

Thanks, Al! Same to you - maybe see you this Sunday, if I can make it. (e) Vivian Ecker 01/06/2005 03:51:04 PM

Re: New Addition to the Luthiers Bio section Pg2 Please welcome V... Jimmy Caldwell 01/05/2005 06:04:52 PM

Re: New Addition to the Luthiers Bio section Pg2 Please welco... Vivian Ecker 01/06/2005 03:50:00 PM

Welcome Vivian Paul Schulte 01/05/2005 05:59:58 PM

Re: Welcome Vivian Vivian Ecker 01/06/2005 03:48:19 PM

Welcome Vivian. Glad you finally joined us, looking forward to your input! Don Atwood 01/05/2005 05:53:27 PM

Thanks, Don! (e) Vivian Ecker 01/06/2005 03:46:15 PM

Re: New Addition to the Luthiers Bio section Pg2 Please welcome V... Paul Woolson 01/05/2005 05:35:11 PM

Re: New Addition to the Luthiers Bio section Pg2 Please welco... Vivian Ecker 01/06/2005 03:45:19 PM

Re: New Addition to the Luthiers Bio section Pg2 Please welcome V... Ron Priest 01/05/2005 04:22:21 PM

Thanks very much, Ron! (e) Vivian Ecker 01/06/2005 03:43:28 PM

Welcome Vivian, Glad to have you with us. Mp 01/05/2005 04:20:08 PM

Thanks, Michael! (e) Vivian Ecker 01/06/2005 03:42:37 PM

Congrats to the first lady to join our BIO Tim McKnight 01/05/2005 01:46:42 PM

Thanks, Tim! (e) Vivian Ecker 01/05/2005 03:37:00 PM

Welcome Vivian!!! Nice website...and Guitar!!! WalterK 01/05/2005 01:21:04 PM

Thank you very much, Walter! (e) Vivian Ecker 01/05/2005 03:36:12 PM

Yay Viv. m 01/05/2005 01:10:20 PM

Thanks, M! (pssst, i know who you are, mysterious mg...) (e) Vivian Ecker 01/05/2005 03:35:25 PM

Busted (e) Matt G 01/05/2005 07:04:53 PM

Re: New Addition to the Luthiers Bio section Pg2 Please welcome V... stan 01/05/2005 12:54:51 PM

Re: New Addition to the Luthiers Bio section Pg2 Please welco... Vivian Ecker 01/05/2005 03:34:18 PM

Hi there Viv John How 01/05/2005 12:29:05 PM

Re: Hi there Viv Vivian Ecker 01/05/2005 03:29:28 PM

Great guitar.... Brock Poling 01/05/2005 12:45:36 PM

Re: Great guitar.... Vivian Ecker 01/05/2005 03:31:01 PM

Viv, welcome, enjoyed the Bio, shop pic and webpage of pics Bruce Dickey 01/05/2005 01:03:58 PM

Re: Viv, welcome, enjoyed the Bio, shop pic and webpage of pics Vivian Ecker 01/05/2005 03:33:06 PM

Lance: What did you do? It's fixed Tim M. 01/05/2005 12:08:38 PM

I gave it another coat of Z-poxy, fixed everything (m) LanceK 01/05/2005 12:22:38 PM

Z-Poxy group buy? Tim M 01/05/2005 12:05:19 PM

Re: Z-Poxy group buy? Mattia Valente 01/06/2005 02:07:09 AM

James Bruce Dickey, Luthier of the week John How 01/05/2005 10:39:41 AM

Re: James Bruce Dickey, Luthier of the week JJ 01/06/2005 02:43:19 AM

Re: James Bruce Dickey, Luthier of the week BobC 01/06/2005 01:19:16 AM

Luthier of the week, and it happened on my Birthday too. Bruce Dickey 01/05/2005 11:09:20 PM

Re: Luthier of the week, and it happened on my Birthday too. L. Presnall 01/06/2005 11:37:41 PM

Thanks L., I feel as old as I look..... BD 01/07/2005 09:11:04 AM

BD, youda man Mp 01/05/2005 04:28:31 PM

Nice job!! Well deserved! Tom Dowey 01/05/2005 12:20:00 PM

Way to go Bruce! Tim M. 01/05/2005 12:06:15 PM

Re: James Bruce Dickey, Luthier of the week stan 01/05/2005 11:44:08 AM

Affectionately also know as BD! LanceK 01/05/2005 11:24:15 AM

Bruce, what color? LanceK 01/05/2005 11:42:24 AM

Re: Bruce, what color? Blue's my favorite BD 01/05/2005 12:49:27 PM

Congratulations Bruce Dickey!!! WalterK 01/05/2005 11:36:32 AM

OLF TSUNAMI Relief Fund grows to over 200 dollars in the first day (m) LanceK 01/05/2005 09:27:04 AM

Blues Creek OLF Special Blues Creek Guitars 01/05/2005 12:14:54 AM

Nothing built, yet........but I got it bad!!!!!! Darin Spayd 01/04/2005 11:46:56 PM

Re: Nothing built, yet........but I got it bad!!!!!! Paul Woolson 01/05/2005 10:43:22 AM

Thanks Paul Darin Spayd 01/05/2005 11:25:06 PM

Polyethylene plastic really helps with control Bruce Dickey 01/05/2005 11:15:04 AM

Thank you! Darin Spayd 01/05/2005 11:40:01 PM

Any vapor barrier between you and the great outdoors is good. BD 01/06/2005 12:17:50 AM

How about the floor itself? Darin Spayd 01/06/2005 12:39:25 AM

Paul, what that Z-Poxy you used for the floor <BG> LanceK 01/05/2005 11:27:06 AM

A few suggestions John Kinnaird 01/05/2005 07:26:45 AM

Greatly appreciated!! Darin Spayd 01/05/2005 11:55:50 PM

Re: Nothing built, yet........but I got it bad!!!!!! LanceK 01/05/2005 06:51:56 AM

Middle of the Mitten! Darin Spayd 01/06/2005 12:15:40 AM

Climate control Steve Kinnaird 01/04/2005 11:53:50 PM

Nice to meet you! (everyone else, too!) Darin Spayd 01/06/2005 12:26:25 AM

Re: Nothing built, yet........but I got it bad!!!!!! 01/04/2005 11:48:26 PM

Re: Nothing built, yet........but I got it bad!!!!!! 01/04/2005 11:48:22 PM

Okay guys this is rattling around in my brain, what about forward shifted brace pattern? Bruce Dickey 01/04/2005 09:39:47 PM

Measure from the 14th fret, not the soundhole B. Steidl 01/05/2005 11:14:28 AM

Re: Measure from the 14th fret, not the soundhole blues creek gutiars 01/06/2005 11:54:02 PM

Re: Measure from the 14th fret, not the soundhole Bruce Dickey 01/05/2005 11:18:36 AM

Re: Okay guys this is rattling around in my brain, what about for... Steve Kinnaird 01/04/2005 11:44:16 PM

Re: Okay guys this is rattling around in my brain, what about... john hall 01/05/2005 12:07:14 AM

Thanks guys, my Martin bood is the Richard Johnson book, not Longworth. Bruce Dickey 01/05/2005 07:43:44 AM

Bruce!!! Can you post a picture of that bracing pattern? WalterK 01/05/2005 05:20:52 PM

Can you post a picture of that bracing pattern? It's up at the othe site... Bruce Dickey 01/05/2005 11:21:07 PM

Re: Okay guys this is rattling around in my brain, what about for... WalterK 01/04/2005 10:37:50 PM

Re: Okay guys this is rattling around in my brain, what about for... John How 01/04/2005 10:36:58 PM

Re: Okay guys this is rattling around in my brain, what about... Hank Mauel 01/04/2005 11:26:35 PM

Hank, Check out ht e new foorum site @..... John How 01/05/2005 10:11:22 AM

Re: Okay guys this is rattling around in my brain, what about... WalterK 01/04/2005 10:41:20 PM

I'm not sure what the actual dimension is but, John How 01/04/2005 11:01:27 PM

Thanks for the info John!!!! WalterK 01/05/2005 09:31:26 AM

Yes!! I would like to find out about forward shift bracing Too!! WalterK 01/04/2005 09:45:31 PM

Mike Payne...How does your X back bracing affect sound? WalterK 01/04/2005 07:35:51 PM

Re: Mike Payne...How does your X back bracing affect sound? Alan Carruth 01/05/2005 06:22:52 PM

I believe Dave Bland ...... Don Atwood 01/05/2005 04:38:09 PM

Re: Ditto what Alan said Dave B - SKG 01/06/2005 08:40:18 AM

Re: Ditto what Alan said Mp 01/06/2005 11:56:47 AM

Re: Hey Alan.... Dave B - SKG 01/06/2005 01:12:19 PM

Re: Ditto what Alan said Mp 01/06/2005 12:09:07 PM

Sorry Walter I have been on the new sight all day...(m) Mp 01/05/2005 03:59:35 PM

In theory the x-braces allow the oscillation to be more parabolic Mp 01/05/2005 05:20:33 PM

Re: In theory the x-braces allow the oscillation to be more parab... WalterK 01/05/2005 05:27:02 PM

I noticed no loss in trebel and a small gain in bass Mp 01/05/2005 05:35:26 PM

Thanks Mike for the info!!! WalterK 01/05/2005 05:16:12 PM

ASIAN TSUNAMI Relief Two ways to give LanceK 01/04/2005 02:39:10 PM

Re: ASIAN TSUNAMI Relief Two ways to give Don Williams 01/04/2005 07:52:56 PM

Scorched Rosewood Jeremiah Bumgarner 01/04/2005 12:34:05 PM

Re: Scorched Rosewood Jeremiah Bumgarner 01/05/2005 07:51:29 AM

Re: Scorched Rosewood Paul Schulte 01/04/2005 06:28:25 PM

Re: Scorched Rosewood Mp 01/05/2005 04:18:08 PM

Acetone (m) LanceK 01/04/2005 02:18:10 PM

Re: Acetone (m) Yup. BD 01/04/2005 02:23:16 PM

The thing about acetone and rosewood is.... Paul Schulte 01/04/2005 06:05:53 PM

Yup. BD 01/04/2005 07:27:28 PM

Re: Scorched Rosewood Dave B - SKG 01/04/2005 01:01:46 PM

Re: Scorched Rosewood stan 01/04/2005 01:47:59 PM

Re: Scorched Rosewood Matt Gage 01/04/2005 03:03:22 PM

Re: Scorched Rosewood Hank Mauel 01/04/2005 05:05:32 PM

Just added to the Library of plans, A Bowl Profiling Fixture, by Michael Payne 01/04/2005 12:18:07 PM

I just noticed there are 38 Luthier Bio Slots available to the highest bidder... Bruce Dickey 01/04/2005 11:04:29 AM

Welcome, Dave, Ron and Rod. It's nice to have you amongst the fold. Roy O 01/04/2005 10:36:09 AM

Re: Welcome, Dave, Ron and Rod. It's nice to have you amongst th... stan 01/04/2005 11:12:30 AM

Thanks Stan for sending a picture of that on.(e) Roy O 01/05/2005 01:08:55 AM

Re: Welcome, Dave, Ron and Rod. It's nice to have you amongst... stan 01/04/2005 11:31:27 AM

Lance & Brock: site problems Tim McKnight 01/04/2005 09:06:21 AM

Guys, were a few days off from changing over to the new site with everything (m) LanceK 01/05/2005 12:10:35 PM

Same here! Steve Kinnaird 01/04/2005 11:34:57 PM

Glad I'm not alone Tim McKnight 01/05/2005 08:58:16 AM

Re: Lance & Brock: site problems Ron P 01/04/2005 10:51:09 AM

Same Here B. Steidl 01/04/2005 10:19:10 AM

Anybody else having these issues? (m) Lance Kragenbrink 01/04/2005 09:35:20 AM

No problems Tom Dowey 01/04/2005 11:18:59 AM

Yes, Lance, I am having these problems too from home. Brock Poling 01/04/2005 10:54:50 AM

No Problems, Windows XP, IE 6.0 sp2 BDickey 01/04/2005 11:09:10 AM

Yes, Lance, I am having these problems too from home. Brock Poling 01/04/2005 10:53:26 AM

No problems <e> Don Atwood 01/04/2005 10:26:23 AM

If it's any consolation: Tim M 01/04/2005 09:56:00 AM

XP & 98 Tim M 01/04/2005 09:53:54 AM

New addition to the Bios section, Please welcome Dave Wendler! Lance Kragenbrink 01/04/2005 08:27:23 AM

Re: New addition to the Bios section, Please welcome Dave Wendler! Rob Bustos 01/05/2005 06:38:35 PM

Re: New addition to the Bios section, Please welcome Dave Wendler! stan 01/04/2005 11:21:38 AM

Welcome Dave, glad you took the invite. Don Atwood 01/04/2005 10:28:17 AM

Welcome Dave!!! Best Forum on the planet!! WalterK 01/04/2005 09:13:42 AM

David Bland, you've got mail Lance Kragenbrink 01/04/2005 08:05:25 AM

Shop Smith speeds for Steve B. Ron Priest 01/03/2005 11:31:18 PM

Welcome to Ron, Page Two is off to a Canadian start..... Bruce Dickey 01/03/2005 10:11:50 PM

Re: Welcome to Ron, Page Two is off to a Canadian start..... Ron 01/03/2005 11:18:30 PM

hey hey Dave Wendler 01/03/2005 05:10:35 PM

Re: hey hey Ron Priest 01/03/2005 11:35:30 PM

Re: hey hey, Hay, Hay, Dave in Missouri, Bruce In Arkansas Bruce Dickey 01/03/2005 06:15:03 PM

Hey Dave! Good to see you here! (m) Lance Kragenbrink 01/03/2005 05:48:36 PM

Cocobolo Mattia Valente 01/03/2005 04:35:51 PM

Look at the pictures of cocobolo at www.Gilmerwood.com John Kinnaird 01/04/2005 07:32:16 AM

Re: Cocobolo rick sellens 01/04/2005 03:38:31 AM

Re: Cocobolo Mattia Valente 01/04/2005 05:15:25 AM

Re: Cocobolo Bruce 01/03/2005 06:20:08 PM

Re: Cocobolo Don W 01/03/2005 05:23:57 PM

Re: Cocobolo - Please let us know when - I might be interested!(e) Dave B - SKG 01/04/2005 10:00:09 AM

Re: Cocobolo stan 01/03/2005 04:59:54 PM

Re: Cocobolo - I have...WOW! (m) Dave B - SKG 01/04/2005 01:28:21 PM

There is a name for this addiction/ condition.... BD 01/04/2005 02:25:05 PM

W.A.S. Don W 01/06/2005 06:39:58 PM

Re: There is a name for this addiction/ condition.... Dave B - SKG 01/04/2005 04:58:31 PM

I think it should go in the OLF dictionary <BG> Don Atwood 01/04/2005 05:15:33 PM

Oldest luthier condition in the world. BD 01/04/2005 07:31:35 PM

Re: Cocobolo Mattia Valente 01/03/2005 05:11:49 PM

Cypress for Steel String Steve Stallings 01/03/2005 03:30:34 PM

Re: Cypress for Steel String Dave B - SKG 01/04/2005 01:32:37 PM

Re: Cypress for Steel String Keith M 01/03/2005 07:41:34 PM

Re: Cypress for Steel String BD 01/03/2005 06:23:12 PM

Re: Cypress for Steel String Keith M 01/03/2005 06:56:40 PM

Is the wood fairly non-descript? BD 01/03/2005 09:32:38 PM

Re: Is the wood fairly non-descript? Keith M 01/03/2005 11:05:50 PM

Serious ZILLION alert (Gary Cote) Personal Stash Lance Kragenbrink 01/03/2005 02:26:07 PM

Demo set of Elixirs to the first 100 Respondents... BD 01/03/2005 01:58:37 PM

Re: I have used set of Elixirs to the first 1-2 Respondents... Dave B - SKG 01/04/2005 05:01:06 PM

When Elixirs first came on the market they used Gimme sets to entice buyers. Bruce D. 01/04/2005 10:53:22 AM

It might be ok. Brock Poling 01/04/2005 09:16:18 AM

I play it safe. If I see the word "survey" Don Atwood 01/04/2005 05:21:06 PM

May not be real, be careful <m> Don Atwood 01/03/2005 03:53:22 PM

You may be right. The link came from the Acoustic Gutiar Forum, formerly Taylor. Bruce Dickey 01/03/2005 06:27:49 PM

http://www.elixirstrings.com/whatsnew/product_pbdemo.html Bruce Dickey 01/03/2005 06:30:47 PM

Register Here to win a Free DICKEY Guitar???? WalterK 01/03/2005 09:20:31 PM

Re: Register Here to win a Free DICKEY Guitar???? Keith M 01/03/2005 11:07:24 PM

Not a bad idea, we'd get a bunch of traffic at the OLF with that one... Bruce Dickey 01/03/2005 09:34:10 PM

Sign up for a Brian Moore Electric Guitar Bruce Dickey 01/03/2005 06:42:36 PM

It's Legit, their dealer list gives my two local music stores... Bruce Dickey 01/03/2005 06:45:31 PM

Re: Demo set of Elixirs to the first 100 Respondents... Keith M 01/03/2005 02:21:41 PM

and then ME! Right behind Keith Lance Kragenbrink 01/03/2005 02:23:26 PM

Speaking of maple rosettes - Thanks Dave Mitchell Jimmy Caldwell 01/03/2005 12:43:52 PM

Try this link Jimmy Caldwell 01/03/2005 12:47:18 PM

Sorry if I forgot anybody, if you sent me anything over the holiday week (m) Lance Kragenbrink 01/03/2005 12:29:47 PM

Could you go over that again? Thanks BD 01/03/2005 01:24:34 PM

New addition to the Bios section, Please welcome Ron Priest! PAGE 2!! Lance Kragenbrink 01/03/2005 12:26:00 PM

Doh! That was me....Anyway, welcome again Ron : ) Don Atwood 01/03/2005 12:31:27 PM

Re: New addition to the Bios section, Please welcome Ron Priest! ... Welcome Ron, good to have you join us <e> 01/03/2005 12:30:18 PM

Welcome ROD!!! OLF...The Best of the Best Forums!! WalterK 01/03/2005 11:20:35 AM

Page two Ron Priest 01/03/2005 11:06:37 AM

Forty-Four Faces on OLF Bio Page, be the first to post a face on Page 2 Bruce Dickey 01/03/2005 10:27:05 AM

New addition to the Bios section, Please welcome Rod True! Lance Kragenbrink 01/03/2005 07:46:05 AM

Welcome Rod. Look forward to seeing more of around here <e> Don Atwood 01/03/2005 08:38:16 AM

Congrats Rod, nice guitar. Bruce Dickey 01/03/2005 08:07:47 AM

Re: Congrats Rod, nice guitar. Rod True 01/03/2005 12:57:31 PM

NEW OLF Auction, Luthier Precision Pearl Inlay Tool (m) Lance Kragenbrink 01/03/2005 07:24:16 AM

Re: Luthier Precision Pearl Inlay Tool (m) Dave B - SKG 01/03/2005 09:35:01 AM

Thickness Sander in process follow up question Steve Brown 01/02/2005 10:53:21 PM

Answers to questions raised Steve Brown 01/03/2005 03:38:58 PM

Re: Thickness Sander in process follow up question blues creek guitars 01/03/2005 08:50:06 AM

Re: Thickness Sander in process follow up question Mattia Valente 01/03/2005 09:59:54 AM

Re: Thickness Sander in process follow up question Ken Buswell 01/03/2005 11:39:19 AM

Don W. has something to show us, Wow, Congrats! Bruce Dickey 01/02/2005 09:05:23 PM

Yay Don, when do you want to get together? Matt G 01/03/2005 07:11:32 AM

Excellent work John Kinnaird 01/03/2005 06:20:12 AM

Marples Chisels: Opinions Please crowduck 01/02/2005 08:33:55 PM

Re: Marples Chisels: Opinions Please Ray L 01/03/2005 09:59:09 PM

You can try these too! Russ Wren 01/03/2005 02:51:55 AM

Marples Chisels: My main chisel for 3 Years, 3/4 inch Bruce Dickey 01/02/2005 09:11:44 PM

Re: Marples Chisels: My main chisel for 3 Years, 3/4 inch BD 01/02/2005 09:34:38 PM

Best Tips from 2004... JJ 01/02/2005 08:05:54 PM

Re: Best Tips from 2004... Don Atwood 01/02/2005 08:12:37 PM

Assuming we are talking about ALL tips... Brock Poling 01/02/2005 08:18:11 PM

John hall - ready to ship your jig...(m) Dave B - SKG 01/02/2005 06:29:20 PM

Re: John hall - ready to ship your jig...(m) john hall 01/02/2005 09:18:40 PM

ROFL Don Atwood 01/03/2005 05:23:47 PM

Re: John hall - To Lance K. (m) Dave B - SKG 01/03/2005 09:40:09 AM

Gopal and Gemwood John Hall 01/02/2005 06:18:13 PM

Excelent! Lance Kragenbrink 01/03/2005 06:17:16 AM

Great news, if you haven't donated to the relief, please consider it Don Atwood 01/02/2005 07:25:27 PM

Re: Gopal and Gemwood Denis E. 01/02/2005 07:00:25 PM

Re: Gopal and Gemwood Bruce Dickey 01/02/2005 06:23:00 PM

Hand tightened Chuck - Anybody remember? Dave B - SKG 01/02/2005 02:05:53 PM

Something along the lines of this Don Atwood 01/02/2005 07:37:40 PM

Ignore previous post, it is a reducer Don A 01/02/2005 07:41:35 PM

Re: Ignore previous post, it is a reducer Dave B - SKG 01/02/2005 08:04:04 PM

Don Atwood did you receive my email (e) Keith M 01/02/2005 09:15:20 AM

I haven't received it. You might try Personal Messenger on the new forum. <m> Don Atwood 01/02/2005 08:09:56 PM

Don Atwood I'll just post it here. Keith M 01/02/2005 09:56:49 PM

Thanks for the link. I'm sure the others would like to see it in detail as well Don Atwood 01/02/2005 10:39:29 PM

In need of Flamed Maple for rosette LanceK 01/02/2005 12:11:54 AM

Re: In need of Flamed Maple for rosette roy noble 01/04/2005 12:20:19 AM

What am I supposed to do with an arm? Jay 01/02/2005 04:28:45 PM

Send me the arm, I'll send the wood.... [m] Don W 01/02/2005 09:29:30 AM

Re: In need of Flamed Maple for rosette Tim McKnight 01/02/2005 09:07:28 AM

Re: In need of Flamed Maple for rosette blues creek guitars 01/02/2005 08:33:15 AM

Re: In need of Flamed Maple for rosette blues creek 01/02/2005 08:32:49 AM

Gopal of Cochin India, in worst hit area Bruce Dickey 01/01/2005 03:21:45 PM

Re: Gopal of Cochin India, in worst hit area Dennis E. 01/01/2005 10:19:27 PM

Re: Gopal of Cochin India, in worst hit area blues creek guitars 01/02/2005 08:35:12 AM

Wishing Everyone the Best New Year Ever!!! WalterK 01/01/2005 02:35:40 PM

eye, happy new year all. [e] Matt G :o) 01/01/2005 10:52:51 PM

Same to you Walter, Happy New Year! BDickey 01/01/2005 03:00:31 PM

Rick Sellens 1066 country UK 01/01/2005 02:08:59 PM

Back in the shop again Mike Mahar 01/01/2005 01:32:23 PM

Re: Back in the shop again, sounds great, go Mike. BD 01/01/2005 02:59:47 PM

Lots of new folks around here, we need a roll call for 2005 Don Atwood 01/01/2005 01:46:43 AM

Glen H - certified amateur Tyler, Texas 01/04/2005 01:46:51 PM

Tim Walsh Seattle, WA 01/04/2005 10:06:06 AM

John How: Cool, California 01/03/2005 12:56:59 PM

Amazing how many of us are from the great state of Insanity (er... Ohio!) Steve Brown 01/02/2005 10:25:19 PM

Jimmy Caldwell - Spicewood, Texas 01/03/2005 12:02:14 PM

Rob Bustos-Vancouver, Canada 01/02/2005 09:43:17 PM

Sudbury, Massachusetts Tom Dowey 01/02/2005 08:37:22 PM

Re: Lots of new folks around here, we need a roll call for 2005 Jim Samuel, Upper Holland, PA 01/02/2005 04:33:54 PM

Al Carruth , Newport NH alcarruth 01/02/2005 03:41:59 PM

Bob Harris, Dallas, TX Bob Harris 01/02/2005 07:31:41 AM

Re: Lots of new folks around here, we need a roll call for 2005 Bob Harris 01/02/2005 07:30:01 AM

Russ Wren, Amsterdam, NL 01/02/2005 06:28:26 AM

Re: Lots of new folks around here, we need a roll call for 2005 Rod True, Abbotsford, BC, Canada 01/02/2005 03:02:21 AM

Re: Lots of new folks around here, we need a roll call for 2005 Paul Davis, Concord California 01/02/2005 01:12:31 AM

Matt Gage Chatham , Massachusetts Matt G 01/01/2005 10:59:04 PM

Steve Kinnaird---Nacogdoches, TX Steve K 01/01/2005 10:58:47 PM

Re: Lots of new folks around here, we need a roll call for 2005 stan thomison 01/01/2005 10:33:15 PM

Craig Lavin, Sunrise, Fl 01/01/2005 10:23:46 PM

Re: Lots of new folks around here, we need a roll call for 2005 Ed Barajas Fresno,Ca. 01/01/2005 09:04:23 PM

Re: Lots of new folks around here, we need a roll call for 2005 John Metenkovic Geelong AUSTRALIA 01/01/2005 06:54:28 PM

Jason Voth. Chilliwack, BC, Canada Jay 01/01/2005 03:06:07 PM

South of Pittsburgh/ West PA Karl Batschke 01/01/2005 02:57:57 PM

Re: Lots of new folks around here, we need a roll call for 2005 Hank Mauel, Auburn, California 01/01/2005 01:59:11 PM

Dave Bland - Sarasota, FL. Dave B - SKG 01/01/2005 01:35:57 PM

Re: Roll call - Lance's new Site (m) Dave B - SKG 01/01/2005 01:38:23 PM

And it has a member list feature Brock Poling 01/01/2005 05:12:14 PM

Re: Lots of new folks around here, we need a roll call for 2005 Mike Mahar, Amherst NH 01/01/2005 01:12:13 PM

Re: Lots of new folks around here, we need a roll call for 2005 John Hall Central Penna. near Yuengling brewery. Oldest one in the US 01/01/2005 12:34:00 PM

Re: Lots of new folks around here, we need a roll call for 2005 Walter Kiralla....Las Vegas, Nevada 01/01/2005 09:18:03 PM

Sorry... Location below went with Gary Cote 01/01/2005 12:32:16 PM

Hi Gary, I was wondering if you packed your PC BD 01/01/2005 03:03:11 PM

Yup... I did Gary Cote 01/01/2005 05:06:14 PM

Re: Yup... I did Happy New Year Gary. Bruce 01/01/2005 10:43:40 PM

Hooksett NH (summer) Key West Fl (winter) 01/01/2005 12:29:30 PM

Bruce Dickey, Russellville, Arkansas 01/01/2005 11:59:51 AM

Tim McKnight, Morral, OH 01/01/2005 11:54:18 AM

John Elshaw, Omaha, NE JE 01/01/2005 11:25:41 AM

Sylvan Wells, Luray, Virginia Sylvan 01/01/2005 11:15:00 AM

John Kinnaird, Social Circle, Georgia....the south shall rise again John Kinnaird 01/01/2005 11:04:10 AM

Roy Ott, Kona, Hawaii 01/01/2005 10:58:53 AM

BruceH - Seaman, Ohio 01/01/2005 10:46:00 AM

JJ Donohue...Warsaw, IN / El Dorado Hills, CA JJ 01/01/2005 10:39:23 AM

Lance Kragenbrink Jackson Michigan (Home of the largest walled prison in the world) 01/01/2005 10:01:54 AM

Brock Poling, Columbus, OH 01/01/2005 09:59:30 AM

Paul Woolson, Madison, WI Paul Woolson 01/01/2005 09:46:20 AM

Frank C - West Chester PA 01/01/2005 09:20:51 AM

Dennis Ecklund, Bradenton Florida Dennis E. 01/01/2005 09:04:55 AM

BKHawk27 (Brian H) Virginia Beach, Va 01/01/2005 09:01:34 AM

Re: Lots of new folks around here, we need a roll call for 2005 Keith M 01/01/2005 08:52:44 AM

Mattia Valente, Amsterdam, The Netherlands Mattia Valente 01/01/2005 05:23:53 AM

Don Atwood - Arlington, VA 01/01/2005 01:47:26 AM

Re: Bob Cefalu Buffalo, NY BobC 01/01/2005 03:44:46 AM

Formula for compensation Paul Davis 12/31/2004 11:16:45 PM

Re: Formula for compensation Keith M 01/01/2005 04:31:07 PM

Re: Formula for compensation Paul Davis 01/01/2005 07:53:58 PM

Re: Formula for compensation Keith M 01/01/2005 11:48:11 PM

Keith, you and Bob Steidl responded last time this came up... Bruce Dickey 01/02/2005 09:38:11 AM

Cumpiano's book has all the math if you don't mind longhand... BD 01/02/2005 09:39:26 AM

Re: Cumpiano's book has all the math if you don't mind longhand... Paul Davis 01/02/2005 01:14:21 PM

Re: Formula for compensation Dave B - SKG 01/01/2005 01:52:42 PM

Re: Formula for compensation Paul Davis 01/01/2005 02:46:52 PM

Re: No "www." before the "harry@..." - Sorry bout that! Dave B - SKG 01/01/2005 01:54:55 PM

Charge all you think it's worth then add 25%.... Bruce Dickey 01/01/2005 02:53:38 AM

Yet another binding question Frank C 12/31/2004 10:25:02 PM

Here is what I use.... Brock Poling 01/01/2005 12:33:43 AM

Re: Here is what I use.... FC 01/01/2005 09:58:14 AM

Was today December 25? Thanks Bob! Frank C 12/31/2004 09:56:52 PM

Re: Was today December 25? Thanks Bob! BobC 01/01/2005 03:29:45 AM

HAPPY NEW YEAR EVERYBODY LanceK 12/31/2004 09:06:32 PM

Re: HAPPY NEW YEAR EVERYBODY BobC 01/01/2005 03:37:12 AM

You too, Lance...(m) Steve Kinnaird 12/31/2004 11:25:38 PM

PC help needed Tim McKnight 12/31/2004 07:30:07 PM

try this Lance Kragenbrink 12/31/2004 07:57:12 PM

It is (e) next??? Tim McKnight 12/31/2004 08:53:42 PM

Something else to try ... Dennis E. 01/01/2005 09:03:05 AM

its under the Mulitmedia catagory.. Lance Kragenbrink 12/31/2004 07:58:31 PM

Re: its under the Mulitmedia catagory.. Tim McKnight 12/31/2004 08:57:59 PM

Who is your ISP? Brock Poling 01/01/2005 12:30:36 AM

Re: Who is your ISP? >Adelphia Tim M 01/01/2005 09:00:02 AM

Like Christmas all over Keith M 12/31/2004 06:10:02 PM

Re: Like Christmas all over BobC 01/01/2005 03:42:43 AM

Re: 2" and 3" sander Dave B - SKG 12/31/2004 08:32:47 PM

Re: 2" and 3" sander Keith M 12/31/2004 11:30:28 PM

Re: 2" and 3" sander Dave B - SKG 01/01/2005 06:36:53 PM

Re: 2" and 3" sander Dave B - SKG 01/01/2005 06:33:37 PM

Re: 2" and 3" sander Keith M 01/02/2005 12:36:25 AM

Re: Like Christmas all over, cool,,, BD 12/31/2004 06:21:53 PM

Latest Work Sylvan 12/31/2004 05:43:54 PM

Re: Latest Work BobC 01/01/2005 03:40:27 AM

Beautiful work there Sylvan <m> Don Atwood 01/01/2005 01:44:36 AM

Semi-Hemispherical Frets Sylvan 01/01/2005 11:09:12 AM

Yes, please do. Brock Poling 01/01/2005 08:18:20 PM

Re: Latest Work JOhn How 01/01/2005 01:41:40 AM

Re: Latest Work sylvan 01/01/2005 11:10:11 AM

Re: Latest Work Stan 01/01/2005 01:06:03 AM

Beautiful guitar Sylvan John Kinnaird 12/31/2004 10:52:34 PM

Inlay Question Frank C 12/31/2004 09:58:48 PM

Usually... Brock Poling 01/01/2005 12:35:30 AM

Re: Latest Work - Outstanding Sylvan-very very Beautiful! Dave B - SKG 12/31/2004 08:38:50 PM

Stunning! (e) Roy O 12/31/2004 08:01:05 PM

Re: Latest Work Tracy L. 12/31/2004 06:24:29 PM

Re: Latest Work Keith M 12/31/2004 06:11:39 PM

Re: Latest Work, Sylvan that is a great way to finish off 2004. Bruce Dickey 12/31/2004 06:29:38 PM

Luthier Bio Spot, one left, Lance might even post it in 2004 if you hurry. Bruce Dickey 12/31/2004 03:20:17 PM

JOHN HALL! Winner of the OLF Auction! Thanks John! LanceK 12/31/2004 12:34:01 PM

Re: JOHN HALL! Winner of the OLF Auction! Thanks John! BLUES CREEK GUITARS 12/31/2004 03:23:42 PM

Fretwire gap filling technique Doug Ubele 12/31/2004 11:22:43 AM

yes and yes (m) Lance Kragenbrink 12/31/2004 11:33:38 AM

OLF Guitar Back to get braced this weekend! Don W 12/31/2004 11:13:03 AM

Wild applause! Yeah, heck yeah! Yeee hawwwww! Bruce Dickey 12/31/2004 11:26:33 AM

Ill get my pickin fingers ready! Wait! I cant play! Guess I better start learning again (BG)~~! LanceK 12/31/2004 11:41:24 AM

Fretwire gap filling technique Doug Ubele 12/31/2004 11:09:29 AM

CA while it is crazy as a glue it is no Crazy Glue.... BD 12/31/2004 11:24:41 AM

Happy New Year John Metenkovic 12/31/2004 01:39:09 AM

Re: Happy New Year to you John! LanceK 12/31/2004 09:06:57 PM

Kerfing Jim Covin 12/31/2004 12:17:59 AM

Will there be another group buy? Frank C 12/31/2004 09:53:17 PM

Re: Will there be another group buy? Yes, here's how you do it... Bruce Dickey 12/31/2004 10:20:36 PM

Re: Kerfing-DIdn't we do a group buy once? WHo was that from? (e) Dave B - SKG 12/31/2004 01:23:20 PM

Last February from Mark Kett Karl Batschke 12/31/2004 01:56:10 PM

I think you're right. I was late and bought solo <e> Don Atwood 12/31/2004 04:50:37 PM

Re: Kerfing stan 12/31/2004 09:18:10 AM

Re: Kerfing, yup Mark Ketts is where I get mine... Bruce Dickey 12/31/2004 09:25:48 AM

Marks uses a smaller kerf too, so you get a cleaner look (m) Lance Kragenbrink 12/31/2004 11:35:11 AM

Marks kerfing is top notch Paul Schulte 12/31/2004 02:27:28 PM

Jim, I buy my kerfing <m> Don Atwood 12/31/2004 12:45:08 AM

I am on the hunt for a small piece of BR Brock Poling 12/30/2004 11:17:14 PM

Re: I am on the hunt for a small piece of BR blues creek guitars 12/31/2004 03:25:23 PM

Re: I am on the hunt for a small piece of BR blues creek guitars 12/31/2004 03:24:58 PM

Re: I am on the hunt for a small piece of BR Steve colonial tonewoods 12/31/2004 01:37:04 PM

Have you checked ebay? FC 12/31/2004 12:14:09 AM

Comments : 12 fret Dreadnaught..How to do it??? WalterK 12/30/2004 09:02:05 PM

Re: Comments : 12 fret Dreadnaught..How to do it??? blues creek guitars 12/31/2004 03:28:11 PM

Flip some Christmas Wrapping paper over and tape it to the bar.... BDickey 12/30/2004 10:47:10 PM

Dumb as a brick question: I have a computer and burn an occasional CD... Bruce Dickey 12/30/2004 07:34:42 PM

Here's some things to try... John Elshaw 12/31/2004 12:23:23 AM

Re: Here's some things to try... Wow, multi-tasking isn't always good... Bruce Dickey 12/31/2004 09:23:25 AM

Read this first before reading my above post... John Elshaw 12/31/2004 12:27:55 AM

In a word, nope. Standard CDs will work fine. paul Woolson 12/30/2004 07:54:35 PM

However.... Brock Poling 12/30/2004 08:08:51 PM

By the time I average in lost cd's, the el cheapos cost more than good ones... BD 12/30/2004 08:57:53 PM

boo to generics Jay 12/31/2004 04:32:14 AM

'nuf said, thanks Bruce Dickey 12/31/2004 09:28:49 AM

Soundhole location John Metenkovic 12/30/2004 04:42:39 PM

Paul Hostetler of AG forum has a great layout showing this, maybe someone has a link. Bruce Dickey 12/30/2004 05:09:35 PM

http://www.lutherie.net/12-14-evolution.html Sylvan 12/30/2004 06:07:21 PM

12-14-evolution.html Thanks Sylvan Bruce D. 12/30/2004 06:42:00 PM

thats debateable (m) Lance Kragenbrink 12/30/2004 05:58:40 PM

Re: thats debateable (m) WalterK 12/30/2004 08:52:57 PM

Re: Paul Hostetler of AG forum has a great layout showing this, m... WalterK 12/30/2004 05:13:44 PM

www.acousticguitar.com BDickey 12/30/2004 06:44:42 PM

Acoustic Guitar Magazine Forum... here is the link Brock Poling 12/30/2004 05:22:15 PM

OLF Auction ENDS tommorow at! 12:00 EST Lance Kragenbrink 12/30/2004 04:21:27 PM

OLF Auction ends tommorow at 12 12/30/2004 04:20:11 PM

OLF Auction ends tommorow at 12 12/30/2004 04:20:07 PM

Lance did you get photo email of top & back clamps I do stan 12/30/2004 09:40:42 AM

Yes sir, sure did, havent had time to get them up, been spending too much time over there :0) Lance Kragenbrink 12/30/2004 01:25:43 PM

Paul congrats as this week luthier well deserved stan 12/30/2004 09:39:24 AM

Re: Paul congrats as this week luthier well deserved JJ 12/30/2004 02:15:37 PM

Re: Paul congrats as this week luthier well deserved Paul Woolson 12/31/2004 01:19:39 PM

OOPS... Wrong Paul! JJ 12/30/2004 02:28:12 PM

Re: Paul congrats as this week luthier well deserved Keith M 12/30/2004 11:59:50 AM

Thanks Stan, I'm humbled. Paul Woolson 12/30/2004 11:17:36 AM

Goint to look at used Peformax 16-32 drum sander, what to look for? (e) Jeff Doty 12/29/2004 06:45:44 PM

Re: Goint to look at used Peformax 16-32 drum sander, what to loo... Tim McKnight 12/29/2004 07:38:56 PM

Keep your fingers crossed... Frank C 12/29/2004 05:11:31 PM

Cam Clamps? Scott 12/29/2004 05:27:38 PM

How I glue top and back Don Atwood 12/30/2004 12:25:19 PM

Re: Cam Clamps? stan 12/29/2004 07:54:19 PM

I'm having trouble picturing this, would you post pictures here? TIA Roy O 12/30/2004 02:56:01 AM

Go Bar Deck..... bd 12/29/2004 05:33:30 PM

Re: I second the go-bar deck Mp 12/29/2004 05:51:52 PM

Re: Go Bar Deck..... (Pic Link Inside) Bruce Dickey 12/29/2004 05:37:41 PM

Re: Go Bar Deck..... (Pic Link Inside) Steve Kinnaird 12/29/2004 10:25:44 PM

Thanks Steve, the methods are crude, but the work full of care... Bruce Dickey 12/29/2004 11:29:25 PM

Re: Go Bar Deck..... (Pic Link Inside) FC 12/29/2004 05:47:29 PM

That depends on your rods <m> Mattia Valente 12/30/2004 03:36:24 AM

Mattia - Improvisation King Bruce Dickey 12/30/2004 10:19:23 AM

Thanks! I'm flattered... Mattia Valente 12/31/2004 05:34:21 AM

Re: Mattia - Improvisation King FC 12/30/2004 12:02:48 PM

Re: Mattia - Improvisation King Mattia Valente 12/31/2004 05:32:31 AM

Cut it apart and make it adjustable.... BD 12/29/2004 06:01:41 PM

Re: Go Bar Deck..... (Pic Link Inside) Mp 12/29/2004 05:57:25 PM

Gaps under fretwire Doug Ubele 12/29/2004 01:29:06 PM

Re: Gaps under fretwire Dave B - SKG 12/30/2004 09:45:43 AM

Hey Doug, [m] Matt G 12/29/2004 08:01:08 PM

Re: Gaps under fretwire Lance Kragenbrink 12/29/2004 01:51:54 PM

sand from the fretboard Doug Ubele 12/29/2004 02:35:33 PM

Try it you'll like it. BD 12/29/2004 02:55:02 PM

Building a guitar is a long process (m) Lance Kragenbrink 12/29/2004 02:45:44 PM

The "ZootMan" Strikes Again! Russ Wren 12/29/2004 12:51:31 PM